Slat Name
(Click on the slat name to go to each page) |
Price for
4' high bag |
*Slat Width |
Mesh Size |
Wire Gauge |
*Wind Load and
Privacy Factor |
*Lead-time for
Shipping |
|
Penny Link (Best Value) |
$25.95 |
1 1/4" |
**
2" & 2 1/4" |
9, 11 or 11 1/2 |
75% |
1-3 Days |
|
Lite Link |
$28.50 |
1 1/4" |
**
2" & 2 1/4" |
9, 11 or 11 1/2 |
75% |
1-3 Days |
|
Option Lock 2" |
$28.25 |
1 3/32" |
**
2" & 2 1/4" |
9, 11 or 11 1/2 |
75% |
1-3 Days |
|
Option Lock 2 1/4" |
$31.25 |
1 1/4" |
2 1/4" |
9, 11 or 11 1/2 |
75% |
1-3 Days |
|
Feather Lock 2" |
$38.50 | 1 1/4" |
2" |
9 or 11 |
80% |
1-3 Days |
|
Feather Lock 2 1/4" |
$41.50 |
1 5/16" |
2 1/4" |
11 or 11 1/2 |
80% |
1-3 Days |
|
Winged
Slat |
$38.80 |
1 7/16" |
2" |
9 or 11 |
90% |
1-3 Days |
|
Bottom Lock
2" |
$34.50 |
1 3/32" |
**
2" or 2 1/4" |
9 or 11 |
75% |
1-3 Days |
|
Bottom Lock
2 1/4" |
$37.50 |
1 1/4" |
**
2 1/4" |
11 or 11 1/2 |
75% |
1-3 Days |
|
Hedge Link |
$66.95 |
N/A |
**
2" or 2 1/4" |
9, 11 or 11 1/2 |
Depends on the mesh size |
1-3 Days |
Click
here on how to measure chain link mesh
*Approximately,
based on the wire, mesh size and stretch tension of the chain link
fence.
**Can be used in 2 1/4" and 2 3/8" mesh, but there will be less privacy.
Specifications
Materials: Extruded from High Density
Polyethylene (HDPE), color pigments and ultra violet (UV) inhibitors,
specifically designed to retard the harmful effects of the sun and lengthen
the life of the product. The only exceptions are:
- Winged Slats includes Ethyl Vinyl Acetate (EVA), a softer plastic
to keep the wings flexible and resilient.
- HedgeLink is made with 16-gauge, galvanized, braided wire and
needles are made with 3-mil (PVC).
HDPE TECHNICAL PROPERTIES:
Melt Index: (.6) A low melt index indicates
improved stress and crack resistance
Density: (.957) Polyethylene ranges anywhere
from .914 to .960 in density. A higher density yields maximum stiffness
without becoming overly brittle.
Minimum Temp: (-76 F) Polyethylene stays
flexible even at this temperature extreme.
Maximum Temp: (250 F) Polyethylene does
not distort until reaching this temperature.
Tensile Strength: (3,700 psi) Material
will not suffer distortion at lesser loads or impacts.
Durability: HDPE fence products are resistant
to: severe weather conditions, salt water, sand, road dirt, most acids,
alcohol, alkaline, ammonia, petroleum distillates, and common environmental
pollutants.
Maintenance: Pressure cleaning of surface
contaminants is quickly accomplished with plain water.
|